MXP
Milan
Italy
7,228 km
4,492 miles
NGD
Anegada
VG
Distance
7,228 km
4,492 mi / 3,903 nm
Est. Flight Time
10h
Long-haul route
Time Difference
-5h
Europe/Rome
Heading
272°
west

Airport Comparison

MXP NGD
Airport Name Malpensa International Airport Captain Auguste George Airport
IATA Code MXP NGD
ICAO Code LIMC TUPA
City Milan Anegada
Country Italy VG
Timezone Europe/Rome America/Tortola
Elevation 768 ft 9 ft
Coordinates 45.630000, 8.730000 18.730000, -64.330000

Milan (MXP) to Anegada (NGD) Flight Distance

The flight distance from Malpensa International Airport (MXP) in Milan, Italy to Captain Auguste George Airport (NGD) in Anegada, VG is 7,228 kilometers (4,492 miles / 3,903 nautical miles). The estimated flight time for this route is approximately 10h, flying west at a heading of 272°.

This is a long-haul route typically operated by wide-body aircraft such as the Boeing 777 or Airbus A350. Full meal service, in-flight entertainment, and comfort amenities are standard.

This is an international route connecting Italy with VG. It is an intercontinental flight between Europe and North America. Travelers should check visa requirements, customs regulations, and any travel advisories before booking.

Time zone information: When it's 10:40 in Milan, it's 05:40 in Anegada. The 5-hour time difference may cause some jet lag. Most travelers adjust within a day or two.

The return flight from Anegada (NGD) to Milan (MXP) follows a heading of 48° (northeast). Actual flight times may vary depending on wind conditions, air traffic, and the specific aircraft used.

For more information about these airports, visit the Malpensa International Airport (MXP) and Captain Auguste George Airport (NGD) detail pages, or use our flight duration calculator to compare other routes.

Calculate Flight Time Between Airports

Use our flight time calculator to find distances and estimated flight travel times between cities. Calculate flight duration for any airport pair worldwide.